基于对齿轮强度的理论分析与计算,采用有限元分析软件ANSYS对某工程车辆变速器高速档齿轮进行静力学分析,通过对齿轮静态弯曲应力的有限元计算,验证该高速档齿轮是否满足变速器齿轮强度要求.运用FE-SAFE软件进行齿轮疲劳寿命分析,并通过ANSYS得到齿轮的疲劳寿命云图,结果表明该变速器高速档齿轮弯曲疲劳寿命是满足要求的.
A finite element analysis software-ANSYS has been used to analyze the static strength of a helical gear pair of the off-road Vehicle transmission,which is based on the theoretical calculation of the transmission gear strength.Whether the strength of the transmission gear of meets the requirements could be verified by the finite element calculation of the static bending stress of the transmission gear.Combining FE-SAFE software to complete the analysis of gear fatigue life,and the fatigue life figure could obtaioed using ANSYS.Results show that the gear bending fatigue meets the requirements.
[1] 邓雷.汽车齿轮变速箱的振动分析与优化设计[D].重庆:重庆大学,2013. DENG L. Vibration analysis and optimal design of automobile gear[D].Chongqing:Chongqing University,2013.
[2] 谢娟娟.30吨重卡变速器关键部件疲劳寿命的研究[D].秦皇岛:燕山大学,2012. XIE J J. 30 T Heavy duty truck transmission study on fatigue life of key components[D].Qinhuangdao:Yanshan University,2012.
[3] 何晓华.20CrMnH齿轮弯曲疲劳强度研究[D].重庆:重庆大学,2011. HE X H. 20CrMnH study on bending fatigue strength of gears[D].Chongqing:Chongqing University,2011.
[4] 丁欣硕.Ansys Workbench 14.5有限元分析案例详解[M].北京:清华大学出版社,2014.
[5] 焦万铭,杨珏,马飞,等.变速器行星齿轮机构等强度优化设计[J].农业机械学报,2015,46(1):359-364.DOI:10.6041/j.issn.1000-1298.2015.01.050. JIAO W M,YANG J,MA F, et al. Equal strength optimal design of planetary gear transmission[J].Transactions of the Chinese Society for Agricultural Machinery, 2015,46(1):359-364. DOI:10.6041/j.issn.1000-1298.2015.01.050.
[6] 任继文,汪金虎.某双离合变速器齿轮的接触应力分析[J].现代机械,2015,04(9):29-32.DOI: 10.13667/j.cnki.52-1046/th.2015.04.009. REN J W, WANG J H. Tooth contact stress analysis of clutch transmission gears[J].Modern Machinery, 2015,04(9):29-32. DOI: 10.13667/j.cnki.52-1046/th.2015.04.009.
[7] 秦春红.汽车变速器齿轮强度的分析与评价[D].吉林:吉林大学,2011. QIN C H. Analysis and evaluation for strength of automotive transmission gears[D].Jilin:Jilin University,2011.
[8] Meirovitch. Fundamentals of vibrations [M]. New York: McGraw Hill International edition, 2001.
[9] 丁海荣.直齿圆柱齿轮根裂纹的扩展分析和疲劳寿命预测[D].兰州:兰州理工大学,2016. DING H R. Crack propagation analysis and fatigue life prediction of spur gears tooth root[D].Lanzhou: Lanzhou University of Technology,2016.
[10] 张娟.大重合度变速器齿轮的承载能力研究[D] :合肥:合肥工业大学,2014. ZHANG J. Bearing capacity research on the transimission gear of high contact ratio[D].Hefei: HeFei University of Technology,2014.
[11] 刘新猛,胡职梁,谢里阳,等.汽车变速器疲劳寿命的研究与发展综述[J].机电工程,2014,31(06):689-696.DOI:10.3969 /j.issn.1001-4551.2014.06.003. LIU X M,HU Z L,XIE L Y,et al. Review on research and development of fatigue life of automotive transmission[J]. Mechanical & Electrical Engineering Magazine,2014,31(06):689-696.DOI:10.3969 /j.issn.1001-4551.2014.06.003.
[12] 张延杰.车辆传动齿轮强度计算现代方法研究[D].上海:上海工程技术大学,2016. ZHANG Y J. Research on modern methods for strength calculation of vehicle transmission gears[D].Shanghai: Shanghai University of Engineering Science,2016.
[13] 刘新猛.汽车变速器关键部件疲劳寿命预测与软件开发[D].吉林:东北大学,2014. LIU X M. Fatigue life prediction and software development about the key component of auto transmission[D].Jilin:Dongbei University,2014.
[14] 徐科飞,王栋,刘昱范,等.齿轮弯曲疲劳试验中齿根弯曲应力计算的若干问题探讨[J].机械传动,2016,40(5):61-63.DOI:10.16578/j.issn.1004.2539.2016.05.014. XU K F, WANG D, LIU Y F, et al. Discussion of some issues on the calculation of the gear tooth root bending stress in the gear bending fatigue test[J].Journal of Mechanical Transmission, 2016,40(5):61-63.DOI:10.16578/j.issn.1004.2539.2016.05.014.
