设计了一种以驱动位移控制进行夹取力控制的柔性机械手,基于有限元软件ABAQUS及动力学仿真软件ADAMS,建立了柔性机械手的动力学模型.以不同尺寸的草莓为夹取目标物,对柔性机械手夹取过程进行动力学仿真分析,得到了夹取力随驱动位移量的增加呈线性增加的变化规律,同时获得了驱动速度与瞬时接触夹取力的关系曲线.在此基础上,对柔性机械手样机进行实验分析,结果表明:通过控制驱动位移量及速度进给,机械手能够实现对目标物草莓的无损夹取.该柔性机械手基于柔顺机构特性,无需复杂的传感反馈系统,即可实现对浆果类易损果实的快速抓取,为农业自动化收获机器人末端装置设计提供了一个新思路.
The flexible manipulator is designed and studied based on that the clamping force controlled by the position control in this paper.Based on the finite element software ABAQUS and dynamic simulation software ADAMS,a dynamic simulation model of the flexible manipulator is established.Different sizes of strawberry are used as the object of analysis,the dynamic simulation analysis of the clamping process of the flexible manipulator is carried out,and the change rule that the clamping force increases linearly with the increase of the driving displacement is obtained.At the same time,the relationship between the driving speed and the instantaneous contact clamping force is also obtained based on the dynamic simulation analysis.On this basis,the prototype of the flexible manipulator is produced,and experiment analysis of clamping process of the flexible manipulator is carried out.The results show that: the flexible manipulator can be achieved nondestructive clamping for fragile strawberry by controlling the displacement and drive speed.Therefore the flexible manipulator can realize clamping of the vulnerable fruit quickly- DOI:10.3969/j.issn.1000-1565.2018.02.002柔性机械手设计与夹取力动态特性仿真分析刘佳,李娜,郝子岩,姜海勇,李朝晖(河北农业大学 机电工程学院,河北 保定 071001)摘 要:设计了一种以驱动位移控制进行夹取力控制的柔性机械手,基于有限元软件ABAQUS及动力学仿真软件ADAMS,建立了柔性机械手的动力学模型.以不同尺寸的草莓为夹取目标物,对柔性机械手夹取过程进行动力学仿真分析,得到了夹取力随驱动位移量的增加呈线性增加的变化规律,同时获得了驱动速度与瞬时接触夹取力的关系曲线.在此基础上,对柔性机械手样机进行实验分析,结果表明:通过控制驱动位移量及速度进给,机械手能够实现对目标物草莓的无损夹取.该柔性机械手基于柔顺机构特性,无需复杂的传感反馈系统,即可实现对浆果类易损果实的快速抓取,为农业自动化收获机器人末端装置设计提供了一个新思路.关键词:柔性机械手;动力学仿真;夹取力;瞬时接触力;动态特性 中图分类号:TP 241.3;TH 112.5 文献标志码:A 文章编号:1000-1565(2018)02-0119-07Design of the flexible manipulator and dynamic characteristics analysis of clamping force LIU Jia,LI Na,HAO Ziyan,JIANG Haiyong,LI Zhaohui(College of Mechanical and Electrical Engineering,Agriculture University of Hebei,Baoding 071001,China)Abstract:The flexible manipulator is designed and studied based on that the clamping force controlled by the position control in this paper.Based on the finite element software ABAQUS and dynamic simulation software ADAMS,a dynamic simulation model of the flexible manipulator is established.Different sizes of strawberry are used as the object of analysis,the dynamic simulation analysis of the clamping process of the flexible manipulator is carried out,and the change rule that the clamping force increases linearly with the increase of the driving displacement is obtained.At the same time,the relationship between the driving speed and the instantaneous contact clamping force is also obtained based on the dynamic simulation analysis.On this basis,the prototype of the flexible manipulator is produced,and experiment analysis of clamping process of the flexible manipulator is carried out.The results show that: the flexible manipulator can be achieved nondestructive clamping for fragile strawberry by controlling the displacement and drive speed.Therefore the flexible manipulator can realize clamping of the vulnerable fruit quickly- 收稿日期:2017-11-03 基金项目:国家自然科学基金资助项目(51305125);河北省自然科学基金资助项目((E2017204037;E2013204110));河北省高等学校科学技术研究优秀青年基金项目(YQ2013007) 第一作者:刘佳(1992—),女,河北唐山人,河北农业大学在读硕士研究生.E-mail:liujia9574@126.com 通信作者:李娜(1981—),女,河北保定人,河北农业大学副教授,博士,主要从事仿生机器人、多体动力学研究.E-mail:res_lina@126.com第2期刘佳等:柔性机械手设计与夹取力动态特性仿真分析without complex sensing and feedback system based on the compliant mechanism characteristics,which provides a new idea for the design of agricultural automation harvesting robot’s end device.
[1] 王明黔,黄伟莉,章国庆.一种可调式机械手末端执行器的结构设计[J].科技广场,2016(04):178-181.DOI:10.13838/j.cnki.kjgc.2016.04.041. WANG M Q,HUANG W L,ZHANG G Q.Structure design of the end effector of an adjustable manipulator[J].Science and Technology Square,2016(04):178-181.DOI:10.13838/j.cnki.kjgc.2016.04.041.
[2] 张飞.欠驱动机械手末端执行器的设计与研究[D].杭州:浙江理工大学,2014.
[3] 张庆利,倪风雷,朱映远,等.三手指空间机器人末端执行器的柔顺抓握策略[J].机器人,2011(4):427-433.DOI: 10.3724/SP.J.1218.2011.00427. ZHANG Q L,NI F L,ZHU Y Y,et al.Compliant grasp strategy for three-fingered space robot end-effector [J].Robot,2011(4):427-433.DOI: 10.3724/SP.J.1218.2011.00427.
[4] 姬伟,罗大伟,李俊乐,等.果蔬采摘机器人末端执行器的柔顺抓取力控制[J].农业工程学报,2014,30(9): 19-26.DOI: 10.3969/j.issn.1002-6819.2014.09.003. JI W,LUO D W,LI J L,et al. Compliance grasp force control for end-effector of fruit-vegetable picking robot [J].Transactions of the Chinese Society of Agricultural Engineering, 2014, 30(9): 19-26.DOI: 10.3969/j.issn.1002-6819.2014.09.003.
[5] 肖金壮,熊鹏,李晓燕,等.一种力位置控制冲击问题解决方法[J].河北大学学报(自然科学版),2011,31(3):309-313.DOI:10.3969/j.issn.1000-1565.2011.03.018. XIAO J Z,XIONG P,LI X Y,et al.A solution for impact problem of force position control[J].Journal of Hebei University(Natural Science Edition),2011,31(3):309-313.DOI:10.3969/j.issn.1000-1565.2011.03.018.
[6] 赵云伟,耿德旭,刘晓敏,等.气动柔性五指机械手的运动学及抓持能力[J].机器人,2014(2):171-178.DOI: 103724/SP.J.1218.2014.00171. ZHAO Y W,GENG D X,LIU X M,et al.Kinematics and its grasp ability of pneumatic flexible five-fingered robot hand[J].Robot,2014(2):171-178.DOI: 103724/SP.J.1218.2014.00171.
[7] 王雯静,余跃庆.基于有限元法的柔顺机构动力学分析[J].机械工程学报,2010,46(09):79-86.DOI: 10.3901/JME.2010.09.079. WANG W J, YU Y Q.Dynamic analysis of compliant mechanisms based onfinite element method[J].Journal of Mechanical Engineering,2010,46(09):79-86.DOI: 10.3901/JME.2010.09.079.
[8] 李娜,王家忠,张建宝,等.一种刚柔混联欠驱动草莓采摘机械手设计[J].河北农业大学学报,2015,38(01),118-121.DOI:10.13320/j.cnki.jauh.2015.0022. LI N,WANG J Z,ZHANG J B,et al.Design of underactuated strawberry harvesting manipulator with rigid-compliant structured[J].Electrical Engineering of Agricultural University of Hebei,2015,38(01):118-121. DOI:10.13320/j.cnki.jauh.2015.0022.
[9] 李娜,姜海勇,张先鹏,等.扇贝脏器气吸分离装置柔顺臂动力学特性分析[J].农业工程学报,2016,32(02):244-251.DOI: 10.11975/j.issn.1002-6819.2016.02.035. LI N,JIANG H Y,ZHANG X P,et al.Dynamic characteristic analysis of distributed—compliant arm in vacuum suction device for scallop viscera separ ation[J].Journal of Agricultural Engineering,2016,32(02):244-251.DOI: 10.11975/j.issn.1002-6819.2016.02.035.
[10] 刘畅,李娜,刘佳.气动柔性草莓采摘机械手ADAMS动力学仿真分析[J].中国科技论文,2017,12(4):390-393.DOI:10.3969/j.issn.2095-2783.2017.04.007. LIU C,LI N,LIU J.Dynamic simulation analysis of ADAMS on pneumatic flexible strawberry picking manipulator[J].Chinese Scientific Papers,2017,12(4):390-393.DOI:10.3969/j.issn.2095-2783.2017.04.007.
