非等效累积损伤模型

  • 孙振铎 ,
  • 吕松峰 ,
  • 侯东勃 ,
  • 张明洋
展开
孙振铎(1980—),男,河北新乐人,河北大学副教授,博士,主要从事金属结构及材料的超高周疲劳失效研究.
E-mail:bdsunzhenduo@126.com

收稿日期: 2021-12-15

  网络出版日期: 2023-02-22

基金资助

河北省自然科学基金资助项目(E2018201265);河北省高等学校科学技术研究项目(QN2017307)

Nonequivalent cumulative damage model

  • SUN Zhenduo ,
  • LYU Songfeng ,
  • HOU Dongbo ,
  • ZHANG Mingyang
Expand
  • 1.School of Quality and Technical Supervision, Hebei University, Baoding 071002, China; 2.Hebei Technology Innovation Center for Lightweight of New Energy Vehicle Power System, Hebei University, Baoding 071000, China; 3.Beijing Institute of Remote Sensing Equipment, Beijing 100854, China

Received date: 2021-12-15

  Online published: 2023-02-22

摘要

开展了45号钢在变幅加载下的疲劳试验,基于试验结果,对Miner模型、Manson-Halford模型、Corten-Dolan模型和叶笃毅模型的预测精度进行对比分析,并基于非等效累积损伤原则,以Miner模型和Manson-Halford模型为基础分别构建了2种新的非等效累积损伤模型.结果表明:4种模型中,Manson-Halford模型的预测精度好于其余3种模型,而本文构建的新的非等效累积损伤模型的预测结果要优于Manson-Halford模型,并且其计算模式较为简便,适宜工程应用.

本文引用格式

孙振铎 , 吕松峰 , 侯东勃 , 张明洋 . 非等效累积损伤模型[J]. 河北大学学报(自然科学版), 2022 , 42(6) : 580 -588 . DOI: 10.3969/j.issn.1000-1565.2022.06.004

Abstract

The fatigue test of No.45 steel under variable amplitude loading was carried out. Based on the experimental results, the prediction accuracy of Miner model, Manson-Halford model, Cortan-Dolan model and YE Duyi model is compared and analyzed. Based on Miner model and Manson-Halford model, two new nonequivalent cumulative damage models are constructed respectively with the principle of nonequivalent cumulative damage. The results show that, the prediction accuracy of Manson-Halford model is better than the other three models, and the prediction results of new nonequivalent cumulative damage models constructed in this paper are better than that of Manson-Halford model, and its calculation mode is relatively simple and suitable for engineering application.

参考文献

[1] 王硕,田晋跃,何绍华.某工程车辆变速器齿轮静态弯曲疲劳寿命分析[J].河北大学学报(自然科学版), 2017, 37(4): 349-354. DOI:10.3969/j.issn.1000-1565.2017.04.003.
[2] 曾云,周思柱,李宁,等.压裂头体材料的疲劳实验与疲劳寿命预估[J].热加工工艺, 2020, 49(6): 47-49. DOI:10.14158/j.cnki.1001-3814.20181461.
[3] 朱达荣,徐德军,刘涛,等.金属低周疲劳过程热力学熵特征分析及寿命预测模型[J].中国机械工程, 2019, 30(16): 1904-1910. DOI:10.3969/j.issn.1004-132x.2019.016.003.
[4] 黄志伟,汪静雪,张兴权,等.循环载荷幅值对7075-T7451铝合金疲劳裂纹扩展行为的影响[J].金属热处理, 2016, 41(9): 38-42. DOI:10.13251/j.issn.0254-6051.2016.09.008.
[5] MINER M A. Cumulative damage in fatigue[J]. Inter Journal of Applied Mechanics, 1945, 12(3): 159-164.
[6] MANSON S S, HALFORD G R. Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage[J]. Int J Fract, 1981, 17(2): 169-192. DOI:10.1007/BF00053519.
[7] 叶笃毅,王德俊.随机疲劳寿命估算中的损伤模型[J].机械强度, 1991, 13(1): 57-60. DOI:10.16579/j.issn.1001.9669.1991.01.013.
[8] 徐灏.疲劳强度[M].北京:高等教育出版社, 1988.
[9] 尚德广,姚卫星.单轴非线性连续疲劳损伤累积模型的研究[J].航空学报, 1998, 19(6): 647-656. DOI:10.3321/j.issn.1000-6893.1998.06.002.
[10] 冯胜,程燕平,赵亚丽,等.线性疲劳损伤累积理论的研究[J].哈尔滨工业大学学报, 2003, 35(5): 608-610. DOI:10.3321/j.issn.0367-6234.2003.05.024.
[11] 冯胜,程燕平,赵亚丽,等.非线性疲劳损伤累积理论研究[J].哈尔滨工业大学学报, 2003, 35(12): 1507-1509. DOI:10.3321/j.issn.0367-6234.2003.12.030.
[12] 谢里阳,任俊刚,吴宁祥,等.复杂结构部件概率疲劳寿命预测方法与模型[J].航空学报, 2015, 36(8): 2688-2695. DOI:10.7527/S1000-6893.2015.0109.
[13] MANSON S S, NACHTIGALL A J, FRECHE J C. A proposed new relation for cumulative fatigue damage in bending[J]. Proc ASTM, 1961, 61: 679-703. (
文章导航

/

〈 〉