Atmospheric pressure plasma jets have the ability to generate a plasma plume with a large number of active species in open space, and have been extensively used for material growth, surface modification, biomedicine and et al. However, the small cross section size of plasma plume have limited the efficiency for plasma jet application. Therefore, it is needed to develop a plasma plume with large-scale. At present, the large-scale plasma plumes reported are mostly cross-field plasma jets, which are less chemically active than the linear-field plasma jets. Excited by an alternate-current voltage, an argon linear-field jet with two electrodes has been developed to generate a large-scale brush-shaped plasma plume.- DOI:10.3969/j.issn.1000-1565.2023.04.005平行场刷形等离子体羽的放电特性及其聚合物表面改性韩国新1,武珈存1,贾焓潇1,王雪芳2,贾鹏英1(1.河北大学 物理科学与技术学院,河北 保定 071002;2.石家庄铁道大学 经济管理学院,河北 石家庄 050043)摘 要:大气压等离子体射流可以在开放空间产生富含活性粒子的等离子体羽,在材料生长、表面改性、生物医疗等领域具有广泛的应用前景. 由于通常等离子体羽的截面尺度很小,造成等离子体射流应用时效率较低,因此,急需产生大尺度的等离子体羽. 目前报道的大尺度的等离子体羽多是交叉场等离子体羽,相比于平行场等离子体羽而言其化学活性较低. 针对于此,本文利用双电极结构的平行场氩气射流,通过交流激励产生了大尺度的刷形等离子体羽. 利用电学、光学和光谱学手段对刷形等离子体羽的放电特性进行了表征. 在此基础上,利用该平行场刷形等离子体羽对聚合物(聚对苯二甲酸乙二醇酯(PET))进行了改性研究. 通过研究PET表面的水接触角(WCA)、拉曼光谱、X线光电子能谱(XPS)和原子力显微镜(AFM)照片,发现刷形等离子体羽能实现PET表面的大尺度均匀改性. 改性后的PET表面含氧极性官能团数量显著增加,并且PET表面的粗糙度增加,因此亲水性得到改善, 此种亲水性改良对不同的聚合物具有普适性. 这些研究结果对于大尺度等离子体射流的深入研究及等离子体表面改性的应用均具有一定参考价值. 关键词:大气压刷形等离子体羽;平行场射流;聚合物表面改性中图分类号:O461.2 文献标志码:A 文章编号:1000-1565(2023)04-0369-10Discharge characteristics of a linear-field brush-shaped plasma plume and surface modification of polymerHAN Guoxin1,WU Jiacun1,JIA Hanxiao1,WANG Xuefang2,JIA Pengying1(1. College of Physics Science and Technology, Hebei University, Baoding 071002, China; 2. School of Economics and Management, Shijiazhuang Tiedao University, Shijiazhuang 050043, China)Abstract: Atmospheric pressure plasma jets have the ability to generate a plasma plume with a large number of active species in open space, and have been extensively used for material growth, surface modification, biomedicine and et al. However, the small cross section size of plasma plume have limited the efficiency for plasma jet application. Therefore, it is needed to develop a plasma plume with large-scale. At present, the large-scale plasma plumes reported are mostly cross-field plasma jets, which are less chemically active than the linear-field plasma jets. Excited by an alternate-current voltage, an argon linear-field jet with two electrodes has been developed to generate a large-scale brush-shaped plasma plume.- 收稿日期:2022-09-06 基金项目:河北省自然科学基金资助项目(HB17JY070);河北大学研究生创新资助项目(HBU2022bs004) 第一作者:韩国新(1997—),男,河北张家口人,河北大学在读硕士研究生,主要从事大气压低温等离子体射流研究.E-mail:hanguoxin2020@163.com 通信作者:贾鹏英(1976—),女,河北保定人,河北大学副教授,主要从事大气压等离子体源、电除尘器和气体放电实验方向研究.E-mail:plasmalab@126.com第4期韩国新等:平行场刷形等离子体羽的放电特性及其聚合物表面改性The discharge characteristics of brush-shaped plasma plume are characterized by electrical, optical and spectral methods. Besides, the linear-field brush-shaped plasma plume is used to modify surface of a polymer(polyethylene terephthalate(PET)). By studying the water contact angle(WCA), Raman spectrum, X-ray photoelectron spectrum(XPS)and atomic force microscopy(AFM)image of PET surface, it is found that the brush-shaped plasma plume can achieve large-scale uniform modification. After plasma modification, the amount of oxygen-containing groups on the surface of PET significantly increases, and the roughness of PET surface also increases. Hence, the hydrophilicity of plasma treated PET surface has been improved. This hydrophilic modification is universal to different polymers. These results are of great significance for the development of large-scale plasma jet and the application of plasma modification.
[1] WELLE F,FRANZ R. Migration of antimony from PET bottles into beverages: determination of the activation energy of diffusion and migration modelling compared with literature data[J]. Food Addit Contam: Part A,2011,28(1):115-126. DOI: 10.1080/19440049.2010.530296.
[2] IVDRE A,FRIDRIHSONE-GIRONE A,ABOLINS A,et al. Effect of different concentration of rapeseed oil and recycled poly(ethylene terephthalate)in polyols for rigid polyurethane foams[J]. Cell Polym,2018,54(2):161-177. DOI: 10.1177/0021955X16670585.
[3] RADENKOV P,RADENKOV M, GRANCHAROV G, et al. Direct usage of products of poly(ethylene terephthalate)glycolysis for manufacturing of glass-fibre-reinforced plastics[J]. Eur Polym J, 2003,39(6):1223-1228. DOI: 10.1016/S0014-3057(02)00331-2.
[4] ALZOUBI K, LU S, SAMMAKIA B,et al. Experimental and analytical studies on the high cycle fatigue of thin film metal on PET substrate for flexible electronics applications[J]. IEEE Trans Compon, Packag, Manuf Technol,2011,1(1):43-51. DOI: 10.1109/TCPMT.2010.2100911.
[5] PARK S J,KO T J, YOON J,et al. Highly adhesive and high fatigue-resistant copper/PET flexible electronic substrates[J]. Appl Surf Sci,2018,427:1-9. DOI: 10.1016/j.apsusc.2017.08.195.
[6] ZHU Y M,WANG Y,SHA L,et al. Preparation of antimicrobial fabric using magnesium-based PET masterbatch[J]. Appl Surf Sci,2017,425:1101-1110. DOI: 10.1016/j.apsusc.2017.07.044.
[7] VESEL A,MOZETIC M. New developments in surface functionalization of polymers using controlled plasma treatments[J]. J Phys D: Appl Phys,2017,50(29):293001. DOI: 10.1088/1361-6463/aa748a.
[8] OZEN I. Enhanced dyeability of poly(ethylene terephthalate)/organoclay nanocomposite filaments[J]. Color Technol,2015,131(6):464-473. DOI: 10.1111/cote.12179.
[9] HOMOLA T,MATOUSEK J,HERGELOVA B,et al. Activation of poly(ethylene terephthalate)surfaces by atmospheric pressure plasma[J]. Polym Degrad Stab,2012,97(11):2249-2254. DOI: 10.1016/j.polymdegradstab.2012.08.001.
[10] KANG Y J,CHUNG H,KIM M S,et al. Enhancement of CNT/PET film adhesion by nano-scale modification for flexible all-solid-state supercapacitors[J]. Appl Surf Sci,2015,355:160-165. DOI: 10.1016/j.apsusc.2015.07.108.
[11] LI X C,LIN X T,WU K Y,et al. Regularly-swelling plumes generated in atmospheric pressure argon plasma jet excited by a biased sinusoidal voltage[J]. Plasma Sources Sci Technol,2019,28(5):055006. DOI: 10.1088/1361-6595/aaffff.
[12] LI X C,CHEN J Y,LIN X T,et al. Morphology transition from diffuse to diffuse-and-filamentary for an argon plume with varying sinusoidal frequency or voltage amplitude[J]. Plasma Sources Sci Technol,2020,29(6):065015. DOI: 10.1088/1361-6595/ab6362.
[13] JIA P Y,GAO K,ZHOU S,et al. Morphology evolution of an atmospheric pressure glow discharge initiated in the air gap between a liquid cathode and a needle anode[J]. Plasma Sources Sci Technol,2021,30(9):095021. DOI: 10.1088/1361-6595/abde51.
[14] LI X C,LIU R J,LI X N,et al. Large-scale surface modification to improve hydrophilicity through using a plasma brush operated at one atmospheric pressure[J]. Phys Plasmas,2019,26(2):023510. DOI: 10.1063/1.5063328.
[15] LI X C,WU J C,JIA B Y,et al. Generation of a large-scale uniform plasma plume through the interactions between a pair of atmospheric pressure argon plasma jets[J]. Appl Phys Lett,2020,117(13):134102. DOI: 10.1063/5.0027061.
[16] LI X C,LIN X T,WU K Y,et al. Plume transition from solid to hollow with increasing the bias value of a sinusoidal voltage applied to an argon plasma jet[J]. Plasma Processes Polym,2018,15(4):e1700224. DOI:10.1002/ppap.201700224.
[17] LI X C,CHEN J Y,WU K Y,et al. A compound plume with solid and hollow parts formed downstream of an argon plasma jet at atmospheric pressure[J]. Phys Plasmas,2021,28(10):103507. DOI: 10.1063/5.0056626.
[18] ZAPLOTNIK R, VESEL A. Effect of VUV Radiation on Surface Modification of Polystyrene Exposed to Atmospheric Pressure Plasma Jet[J]. Polymers,2020,12(5):1136. DOI: 10.3390/polym12051136.
[19] NARIMISA M,ONYSHCHENKO Y,MORENT R,et al. Improvement of PET surface modification using an atmospheric pressure plasma jet with different shielding gases[J]. Polymer,2021,215:123421. DOI: 10.1016/j.polymer.2021.123421.
[20] WAN M,LIU F,FANG Z,et al. Influence of gas flow and applied voltage on interaction of jets in a cross-field helium plasma jet array[J]. Phys Plasmas,2017,24(9): 093514. DOI: 10.1063/1.4991531.
[21] LIU F, ZHANG B, FANG Z,et al. Jet-to-jet interactions in atmospheric-pressure plasma jet arrays for surface processing[J]. Plasma Processes Polym,2018,15(1):e1700114. DOI: 10.1002/ppap.201700114.
[22] ZHANG C,SHAO T,ZHOU Y X,et al. Effect of O-2 additive on spatial uniformity of atmospheric-pressure helium plasma jet array driven by microsecond-duration pulses[J]. Appl Phys Lett,2014,105(4):044102. DOI: 10.1063/1.4887992.
[23] LI X,LIU Y F,WANG L F,et al. Uniformity improvement of plumes in an atmospheric pressure argon plasma jet array by electric field optimization[J]. Eur Phys J D,2019,73(8):174. DOI: 10.1140/epjd/e2019-90643-9.
[24] WALSH J L,KONG M G. Contrasting characteristics of linear-field and cross-field atmospheric plasma jets[J]. Appl Phys Lett,2008,93(11):111501. DOI: 10.1063/1.2982497.
[25] 李雪辰,张盼盼,李霁媛,等. 棒-环电极大气压等离子体射流的光谱特性[J]. 光谱学与光谱分析,2017,37(6):1696-1699. DOI: 10.3964/j.issn.1000-0593(2017)06-1696-04.
[26] 张盼盼, 李雪辰, 贾鹏英,等.电场与流场夹角对大气压等离子体羽动力学的影响[J].中国科学: 物理学 力学 天文学,2017,47(6):87-92. DOI: 10.1360/SSPMA2016-00449.
[27] LI X C,WU K Y,LIU R J,et al. Spatial-temporal evolution and plasma parameters’ diagnosis of a transverse glow discharge in atmospheric pressure air[J]. IEEE Trans Plasma Sci,2019,47(2):1330-1335. DOI: 10.1109/TPS.2018.2882987.
[28] WU J C,WU K Y,CHEN J Y,et al. Influence of air addition on surface modification of polyethylene terephthalate treated by an atmospheric pressure argon plasma brush[J]. Plasma Sources Sci Technol,2021,23(8):085504. DOI: 10.1088/2058-6272/ac0109.
[29] LI X M,TANG J,ZHAN X F,et al. A dielectric-barrier discharge enhanced plasma brush array at atmospheric pressure[J]. Appl Phys Lett,2013,103(3):033519. DOI: 10.1063/1.4816061.
[30] LI X C,CHU J D,JIA P Y,et al. Characterization of a laminar plasma plume based on dielectric-barrier discharge at atmospheric pressure[J]. IEEE Trans Plasma Sci,2018,46(3):583-586. DOI: 10.1109/TPS.2018.2797954.
[31] LI X C,CHU J D,ZHANG Q,et al. Performance of a large-scale barrier discharge plume improved by an upstream auxiliary barrier discharge[J]. Appl Phys Lett,2016,109(20):204102. DOI: 10.1063/1.4966558.
[32] XU H,CHEN C,LIU D X,et al. Contrasting characteristics of aqueous reactive species induced by cross-field and linear-field plasma jets[J]. J Phys D: Appl Phys,2017,50(24):245201. DOI: 10.1088/1361-6463/aa7118.
[33] LIU X,WANG C C,LIU J Y,et al. Comparative study of surface modification of polyethylene by parallel-field and cross-field atmospheric pressure plasma jets[J]. J Appl Phys,2019,125(12):123301. DOI: 10.1063/1.5061751.
[34] LI X C,LI J Y,CHU J D,et al. A linear-field plasma jet for generating a brush-shaped laminar plume at atmospheric pressure[J]. Phys Plasmas,2016,23(6):063521. DOI: 10.1063/1.4954829.
[35] 杨丽君,宋彩虹,赵娜,等.大气压氩气刷形等离子体羽的特性研究[J].物理学报,2021,70(15):155201. DOI: 10.7498/aps.70.20202091.
[36] LUPINKOVA S,KAIMLOVA M,KORMUNDA M,et al. Chitosan-capped sulfur microparticles grafted on UV-treated PET surface[J]. Surf Interface Anal,2021,53(1):108-117. DOI: 10.1002/sia.6884.
[37] LI X M,TANG J,ZHAN X F,et al. A dielectric-barrier discharge enhanced plasma brush array at atmospheric pressure[J]. Appl Phys Lett,2013,103(3):033519. DOI: 10.1063/1.4816061.
[38] DENG X,NIKIFOROV A Y,IONITA E R,et al. Absolute and relative emission spectroscopy study of 3 cm wide planar radio frequency atmospheric pressure bio-plasma source[J]. Appl Phys Lett,2015,107(5):053702. DOI: 10.1063/1.4928470.
[39] ZHDANOVA O S, KUZNETSOV V S, PANARIN V A,et al. A planar source of atmospheric-pressure plasma jet[J]. Plasma Phys Rep,2018,44(1):153-156. DOI: 10.1134/S1063780X18010166.
[40] JIANG W M,TANG J,WANG Y S,et al. Characterization of argon direct-current glow discharge with a longitudinal electric field applied at ambient air[J]. Sci Rep,2014,4:6323. DOI: 10.1038/srep06323.
[41] 李雪辰,张盼盼,楚婧娣,等.直流激励针-环等离子体喷枪放电模式的实验研究[J].中国科学: 物理学 力学 天文学,2017,47(2):80-86. DOI: 10.1360/SSPMA2016-00318.
[42] WU J C,WU K Y,REN C H,et al. Comparison of discharge characteristics and methylene blue degradation through a direct-current excited plasma jet with air and oxygen used as working gases[J]. Plasma Sci Technol,2020,22(5):055505. DOI: 10.1088/2058-6272/ab6c00.
[43] GOTOH K,SHOHBUKE E,KOBAYASHI Y,et al. Wettability control of PET surface by plasma-induced polymer film deposition and plasma/UV oxidation in ambient air[J]. Colloid Surf A-Physicochem Eng Asp,2018,556:1-10. DOI: 10.1016/j.colsurfa.2018.07.033.
[44] KALASINSKY K S,KALASINSKY VE. Infrared and Raman microspectroscopy of foreign materials in tissue specimens[J]. Spectrochim Acta, Part A,2005,61(7):1707-1713. DOI: 10.1016/j.saa.2004.12.048.
[45] LI X C,LIU R J,LI X N,et al. Large-scale surface modification to improve hydrophilicity through using a plasma brush operated at one atmospheric pressure[J]. Phys Plasmas,2019,26(2):023510. DOI: 10.1063/1.5063328.
[46] WU J C,WU K Y,CHEN J Y,et al. Influence of air addition on surface modification of polyethylene terephthalate treated by an atmospheric pressure argon plasma brush[J]. Plasma Sci Technol,2021,23(8):085504. DOI: 10.1088/2058-6272/ac0109.
[47] FANF Z,YANG J R,LIU Y,et al. Surface treatment of polyethylene terephthalate to improving hydrophilicity using atmospheric pressure plasma jet[J]. IEEE Trans Plasma Sci,2013,41(6):1627-1634. DOI: 10.1109/TPS.2013.2259508.
[48] NGUYEN T P T,BARROCA-AUBRY N,DRAGOE D,et al. Facile and efficient Cu(0)-mediated radical polymerisation of pentafluorophenyl methacrylate grafting from poly(ethylene terephthalate)film[J]. Eur Polym J,2019,116:497-507. DOI: 10.1016/j.eurpolymj.2019.04.045.
[49] ZHANG B,CHEN S X,WANG W C,et al. Polyester(PET)fabrics coated with environmentally friendly adhesive and its interface structure and adhesive properties with rubber[J]. Compos Sci Technol,2020,195:108171. DOI: 10.1016/j.compscitech.2020.108171.
[50] DONEGAN M,MILOSAVLJEVIC V,DOWLING D P. Activation of PET using an RF atmospheric plasma system[J]. Plasma Chem Plasma Process,2013,33(5):941-957. DOI: 10.1007/s11090-013-9474-4.
[51] FANG Z,WANG XJ,SHAO T,et al. Influence of oxygen content on argon/oxygen dielectric barrier discharge plasma treatment of polyethylene terephthalate film[J]. IEEE Trans Plasma Sci,2017,45(2):310-317. DOI: 10.1109/TPS.2016.2633063.
[52] GOTOH K,KOBAYASHI Y,YASUKAWA A,et al. Surface modification of PET films by atmospheric pressure plasma exposure with three reactive gas sources[J]. Colloid Polym Sci,2012,290(11):1005-1014. DOI: 10.1007/s00396-012-2600-7.
[53] WANG T,SHI LP,LV L,et al. Homogeneous surface hydrophilization on the inner walls of polymer tubes using a flexible atmospheric cold microplasma jet[J]. Plasma Processes Polym,2020,17(9):e2000056. DOI: 10.1002/ppap.202000056.
[54] PANG H,CHEN Q,LI B,et al. The role of oxygen in a large area of RF-powered atmospheric pressure dielectric barrier glow discharge plasma in sterilization[J]. IEEE Trans Plasma Sci,2011,39(8):1689-1694. DOI: 10.1109/TPS.2011.2155104. (
