Effect of film thickness of carbon fiber supported Re-Pt3Ni composite on the performance of dye sensitized solar cells

  • YU Minsi ,
  • XIE Jianjun ,
  • SHAN Yiyang ,
  • ZHAO Hengqi ,
  • LAI Weidong ,
  • XIAO Jinchong ,
  • LI Ling
Expand
  • 1.Hebei Key Lab of Optic-electronic Information and Materials, College of Physics Science and Technology, Hebei University, Baoding 071002, China; 2. College of Chemistry and Environmental Science, Hebei University, Baoding 071002, China

Received date: 2018-06-26

  Online published: 2018-11-25

Abstract

Carbon nanofibers were prepared by electrospinning, then Re-Pt3Ni Supported by Carbon Nanofibers Composite were prepared by heating in oil bath. The composite electrodes with different film thickness were prepared by ball milling and spraying, and the electrodes were 5, 10, 15 and 20 μm respectively. The influence of film thickness on the performance of dye-sensitized solar cells was studied, Energy conversion efficiency were 5.12%, 7.67%, 8.43%, 8.09%. The results show that with the increase of the thickness of the electrode film, the performance of DSSCs first increases and then decreases, and when the thickness of the electrode is about 15 μm, the performance of DSSCs is the best. At the same time, it also- DOI:10.3969/j.issn.1000-1565.2018.06.004碳纤维负载Re-Pt3Ni复合材料对电极膜厚对染敏电池性能影响于敏思1,解建军1,单一洋1,赵恒启1,赖伟东1,肖金冲2,李玲1(1.河北大学 物理科学与技术学院,河北省光电信息材料重点实验室,河北 保定 071002;2. 河北大学 化学与环境科学学院,河北 保定 071002)摘 要:采用静电纺丝技术制备碳纳米纤维,通过油浴加热法制备碳纳米纤维负载Re-Pt3Ni复合材料.为了研究该复合材料对电极的膜厚对染料敏化太阳能电池性能的影响,通过球磨以及喷涂法得到不同膜厚的对电极,分别为5、10、15、20 μm,所得电池的能量转换效率分别为5.12%、7.67%、8.43%、8.09%.结果表明复合材料对电极膜厚存在一个最佳值,使电池的能量转换效率达到最高,同时,也表明复合材料有潜力成为Pt电极的替代品.关键词:染料敏化太阳能电池;对电极;碳纳米纤维;复合材料中图分类号:O643 文献标志码:A 【additional_page=587】文章编号:1000-1565(2018)06-0576-06Effect of film thickness of carbon fiber supported Re-Pt3Ni composite on the performance of dye sensitized solar cellsYU Minsi1, XIE Jianjun1, SHAN Yiyang1, ZHAO Hengqi1, LAI Weidong1, XIAO Jinchong2, LI Ling1(1.Hebei Key Lab of Optic-electronic Information and Materials, College of Physics Science and Technology, Hebei University, Baoding 071002, China;2. College of Chemistry and Environmental Science, Hebei University, Baoding 071002, China)Abstract: Carbon nanofibers were prepared by electrospinning, then Re-Pt3Ni Supported by Carbon Nanofibers Composite were prepared by heating in oil bath. The composite electrodes with different film thickness were prepared by ball milling and spraying, and the electrodes were 5, 10, 15 and 20 μm respectively. The influence of film thickness on the performance of dye-sensitized solar cells was studied, Energy conversion efficiency were 5.12%, 7.67%, 8.43%, 8.09%. The results show that with the increase of the thickness of the electrode film, the performance of DSSCs first increases and then decreases, and when the thickness of the electrode is about 15 μm, the performance of DSSCs is the best. At the same time, it also- 收稿日期:2018-06-26 基金项目:国家自然科学基金资助项目(51772073;21672051;21201053;51607054;51762013);河北大学研究生创新资助项目(hbu2018ss63);河北省杰出青年基金资助项目(A2017201082;A2018201019);河北省第二批青年拔尖人才计划项目(702800116025;70280011808);河北大学杰出青年基金资助项目(2015JQ02);河北大学2018年实验室开放项目(sy201849;sy201850) 第一作者:于敏思(1994—),女,北京平谷人,河北大学在读硕士研究生,主要从事新型纳米光电材料与器件研究.E-mail:minsiyuhbu@163.com 通信作者:李玲(1980—),女,河北保定人,河北大学副教授,主要从事新型纳米光电材料与器件研究.E-mail:lilinghbu@163.com第6期于敏思等:碳纤维负载Re-Pt3Ni复合材料对电极膜厚对染敏电池性能影响shows that the composite has the potential to replace the Pt material.

Cite this article

YU Minsi , XIE Jianjun , SHAN Yiyang , ZHAO Hengqi , LAI Weidong , XIAO Jinchong , LI Ling . Effect of film thickness of carbon fiber supported Re-Pt3Ni composite on the performance of dye sensitized solar cells[J]. Journal of Hebei University(Natural Science Edition), 2018 , 38(6) : 576 -581 . DOI: 10.3969/j.issn.1000-1565.2018.06.004

References

[1] O’REGAN B, GRATZEL M. Electrochemical photolysis of water at a semiconductor electrode[J]. Nature, 1991, 353: 737-740. DOI:org/10.1038/238037a0.
[2] GRATZEL M. Photoelectrochemical cells[J]. Nature, 2001, 414(6861): 338-344. DOI:org/10.1038/35104607.
[3] MOTLAK M, BARAKAT N A M, AKHTAR M S, et al. High performance of NiCo nanoparticles-doped carbon nanofibers as counter electrode for dye-sensitized solar cells[J]. Electrochimica Acta, 2015, 160: 1-6. DOI:.org/10.1016/j.electacta.2015.02.063.
[4] BARAKAT N A M, AKHTAR M S, YOUSEF A, et al. Pd-Co-doped carbon nanofibers with photoactivity as effective counter electrodes for DSSCs[J]. Chemical Engineering Journal, 2012, 211: 9-15. DOI:.org/10.1016/j.cej.2012.09.040.
[5] MOTLAR M, BARAKAT N A M, AKHTAR M S, et al. Influence of GO incorporation in TiO2 nanofibers on the electrode efficiency in dye-sensitized solar cells[J]. Ceramics International, 2015, 41(1): 1205-1212. DOI: org/10.1016/j.ceramint.2014.09.049.
[6] KIMURA M, NOMOTO H, MASAKI N, et al. Dye molecules for simple co-sensitization process: fabrication of mixed-dye-sensitized solar cells[J]. Angewandte Chemie International Edition, 2012, 51(18): 4371-4374.DOI:org/10.1002/ange.201108610.
[7] YE M, WEN X R, WANG M Y, et al. Recent advances in dye-sensitized solar cells: from photoanodes, sensitizers and electrolytes to counter electrodes[J]. Materials Today, 2015, 18(3): 155-162.DOI: org/10.1016/j.mattod.2014.09.001.
[8] YELLA A, LEE H W, YI C, et al. Porphyrin-sensitized solar cells with cobalt(Ⅱ/Ⅲ)-based redox electrolyte exceed 12 percent efficiency[J]. Science, 2011, 334(6056): 629-634. DOI:10.1126/science.1209688.
[9] YUN S, HAGFELDT A, MA T. Pt-free counter electrode for dye-sensitized solar cells with high efficiency[J]. Advanced Materials, 2014, 26(36): 6210-6237. DOI: org/10.1002/adma.201402056.
[10] ZHANG T, LIU Y, YUN S. Recent advances in counter electrodes for thiolate-mediated dye-sensitized solar cells[J]. Israel Journal of Chemistry, 2015, 55(9): 943-954. DOI: org/10.1002/ijch.201400190.
[11] WU M, MA T. Recent progress of counter electrode catalysts in dye-sensitized solar cells[J]. The Journal of Physical Chemistry C, 2014, 118(30): 16727-16742. DOI:10.1021/jp412713h.
[12] FANG X M, MA T L, GUAN G Q, et al. Performances characteristics of dye-sensitized solar cells based on counter electrodes with Pt films of different thickness[J]. Journal of Photochemistry and Photobiology A: Chemistry, 2004, 164(1): 179-182. DOI: org/10.1016/j.jphotochem.2003.12.024.
[13] OLSEN E, HAGEN G, LINDQUIST S E. Dissolution of platinum in methoxy propionitrile containing LiI/I2[J]. Solar Energy Materials and Solar Cells, 2000, 63(3): 267-273. DOI: org/10.1016/S0927-0248(00)00033-7.
[14] JIANG Q W, WANG F, GAO X P, et al. Highly ordered mesoporous carbon arrays from natural wood materials as counter electrode for dye-sensitized solar cells[J]. Electrochemistry Communications, 2010, 12(7): 924-927. DOI: org/10.1016/j.elecom.2010.04.022.
[15] TAI Q D, CHEN B L, GUO F, et al. In situ prepared transparent polyaniline electrode and its application in bifacial dye-sensitized solar cells[J]. Acs Nano, 2011, 5(5): 3795-3799. DOI:10.1021/nn200133g.
[16] SAITO Y, KUBO W, KITAMURA T, et al. I-/I3- redox reaction behavior on poly(3, 4-ethylenedioxythiophene)counter electrode in dye-sensitized solar cells[J]. Journal of Photochemistry and Photobiology A: Chemistry, 2004, 164(1): 153-157. DOI: org/10.1016/j.jphotochem.2003.11.017.
[17] SUN H C, QIN D, HUANG S, et al. Dye-sensitized solar cells with NiS counter electrodes electrodeposited by a potential reversal technique[J]. Energy & Environmental Science, 2011, 4(8): 2630-2637. DOI:10.1039/C0EE00791A.
[18] WU M, WANG Y, LIN X, et al. Economical and effective sulfide catalysts for dye-sensitized solar cells as counter electrodes[J]. Physical Chemistry Chemical Physics, 2011, 13(43): 19298-19301. DOI:10.1039/C1CP22819F.
[19] WANG M, ANGHEL A M, MARSAN B, et al. CoS supersedes Pt as efficient electrocatalyst for triiodide reduction in dye-sensitized solar cells[J]. Journal of the American Chemical Society, 2009, 131(44): 15976-15977. DOI:10.1021/ja905970y.
[20] LI G R, SONG J, PAN G L, et al. Highly Pt-like electrocatalytic activity of transition metal nitrides for dye-sensitized solar cells[J]. Energy & Environmental Science, 2011, 4(5): 1680-1683. DOI:10.1039/C1EE01105G.
[21] KANG J S, PARK M A, KIM J Y, et al. Reactively sputtered nickel nitrideas electrocatalytic counter electrode for dye-and quantum dot-sensitizedsolar cells [J]. Sci Rep, 2015,5: 10450. DOI:10.1038/srep10450(2015).
[22] WU M X, GUO H Y, LIN Y N, et al. Synthesis of highly effective vanadium nitride(VN)peas as a counter electrode catalyst in dye-sensitized solar cells[J]. The Journal of Physical Chemistry C, 2014, 118(24): 12625-12631. DOI:10.1021/jp501797e.
[23] CHEN L, DAI H, ZHOU Y, et al. Porous, single crystalline titanium nitride nanoplates grown on carbon fibers: excellent counter electrodes for low-cost, high performance, fiber-shaped dye-sensitized solar cells[J]. Chemical Communications, 2014, 50(92): 14321-14324. DOI:10.1039/C4CC03882G.
[24] ZHANG X Y, CHEN X, DONG S, et al. Hierarchical micro/nano-structured titanium nitride spheres as a high-performance counter electrode for a dye-sensitized solar cell[J]. Journal of Materials Chemistry, 2012, 22(13): 6067-6071. DOI:10.1039/C2JM30420A.
[25] WANG G Q, LIU S M. Porous titanium nitride microspheres on Ti substrate as a novel counter electrode for dye-sensitized solar cells[J]. Materials Letters, 2015, 161: 294-296. DOI: org/10.1016/j.matlet.2015.08.110.
[26] HE B, MENG X, TANG Q, et al. Low-cost CoPt alloy counter electrodes for efficient dye-sensitized solar cells[J]. Journal of Power Sources, 2014, 260: 180-185. DOI: org/10.1016/j.jpowsour.2014.03.035.
[27] HE B, MENG X, TANG Q. Low-cost counter electrodes from CoPt alloys for efficient dye-sensitized solar cells[J]. ACS Applied Materials & Interfaces, 2014, 6(7): 4812-4818. DOI:10.1021/am405706q.
[28] HE B, TANG Q, YU L, et al. Cost-effective alloy counter electrodes as a new avenue for high-efficiency dye-sensitized solar cells[J]. Electrochimica Acta, 2015, 158: 397-402. DOI: org/10.1016/j.electacta.2015.01.194.
[29] LIU J, TANG Q, HE B, et al. Cost-effective bifacial dye-sensitized solar cells with transparent iron selenide counter electrodes. An avenue of enhancing rear-side electricity generation capability[J]. Journal of Power Sources, 2015, 275: 288-293. DOI: org/10.1016/j.jpowsour.2014.10.152.
[30] LIU J, TANG Q, HE B, et al. Cost-effective, transparent iron selenide nanoporous alloy counter electrode for bifacial dye-sensitized solar cell[J]. Journal of Power Sources, 2015, 282: 79-86. DOI: org/10.1016/j.jpowsour.2015.02.045.
[31] LAN Z, QUE L, WU W, et al. Preparation of Pt-NiO/Co3O4 nanocompounds based counter electrodes from Pt-Ni/Co alloys for high efficient dye-sensitized solar cells[J]. Journal of Alloys and Compounds, 2015, 646: 80-85. DOI: org/10.1016/j.jallcom.2015.06.088.
[32] HUANG X, ZHAO Z, CAO L, et al. High-performance transition metal-doped Pt3Ni octahedra for oxygen reduction reaction[J]. Science, 2015, 348(6240): 1230-1234. DOI:10.1126/science.aaa8765.
[33] LI L, ZHU P, PENG S, et al. Controlled growth of CuS on electrospun carbon nanofibers as an efficient counter electrode for quantum dot-sensitized solar cells[J]. The Journal of Physical Chemistry C, 2014, 118(30): 16526-16535. DOI:10.1021/jp4117529.
[34] LI L, ZHANG X, WANG D, et al. Electrospinning synthesis of high performance carbon nanofiber coated flower-like MoS2 nanosheets for dye-sensitized solar cells counter electrode[J]. Electrochimica Acta, 2018, 280: 94-100. DOI: org/10.1016/j.electacta.2018.05.113.
[35] FREITAG M, TEUSCHER J, SAYGILI Y, et al. Dye-sensitized solar cells for efficient power generation under ambient lighting[J].Nat Photonics, 2017, 11(6):372. DOI:org/10.1038/nphoton.2017.60.
Outlines

/

〈 〉