Journal of Hebei University(Natural Science Edition) >

2019 , Vol. 39 >Issue 5: 459 - 465

DOI: https://doi.org/10.3969/j.issn.1000-1565.2019.05.003

Measurement method of the standard volume of bell provers

  • LIU Chenkui ,
  • QU Hongqiang ,
  • CHEN Shiyan ,
  • NIU Lina ,
  • XING Jingfang
Expand
  • Instiute of Thermal Engineering and Energy Metrology, Institute of Metrology of Hebei Province, Shijiazhuang 050000, China

Received date: 2019-01-27

  Online published: 2019-09-25

Fold

Abstract

In order to accurately measure the standard volume of large volume and high accuracy bell provers, the measurement methods of dimension and industrial digital photogrammetry are selected as the research method on the basis of reference verification regulation and new standard volume measurement methods at worldwide.Through building mathematical model, collecting test datas and comparing analysis, it is proved that industrial digital photogrammetry technology can meet the requirement of traceability, and the method has high automation degree, high measurement accuracy and high subdivision degree, and can construct the geometry of the inner cavity effectively, which provides the possibility for the follow-up study of start and stop measurement at any point of bell provers.

Key words： bell provers; standard volume; the measurement method of dimension; the measurement method of industrial digital photogrammetry

Cite this article

LIU Chenkui , QU Hongqiang , CHEN Shiyan , NIU Lina , XING Jingfang . Measurement method of the standard volume of bell provers[J]. Journal of Hebei University(Natural Science Edition), 2019 , 39(5) : 459 -465 . DOI: 10.3969/j.issn.1000-1565.2019.05.003

References

[1] 刘辰魁, 屈宏强, 陈世砚, 等. 0.1级钟罩式气体流量标准装置的研究[J]. 中国测试, 2019,45(3): 80-88.
[2] 孙彦楷, 周文辉, 李建鹏. 尺寸测量法与静态容积法检定钟罩装置分析[J]. 电子质量, 2016(3): 16-18. DOI:10.3969/j.issn.1003-0107.2016.03.005.
[3] BRUNNEMAN H, ASCHENBRENNER A. Volume with guarantee[R]. Physikalisch-Technische Bundesanstalt, 1983.
[4] 王池,崔骊水.气体流量标准装置钟罩外径测量方法的研究[J].计量学报,2007,28(3):239-242.
[5] 李旭,崔骊水,孟涛,等.基于尺寸法的标定钟罩式气体流量标准装置的新方法[J].计量技术,2008(09):42-45.DOI:10.3969/j.issn.1000-0771.2008.09.013.
[6] 张礼才. 关节臂式三坐标测量机在特殊尺寸测量中的应用[J]. 煤矿机电, 2018(4): 51-53, 56. DOI:10.16545/j.cnki.cmet.2018.04.015.
[7] 刘夷平,宋进,许尧,等.钟罩式气体流量标准装置内部容积的测量方法[J].计量学报,2016,37(06):615-618.DOI:10.3969/j.issn.1000-1158.2016.06.14.
[8] 黄桂平,钦桂勤.大尺寸三坐标测量方法与系统[J].宇航计测技术,2007,27(04):15-19.DOI:10.3969/j.issn.1000-7202.2007.04.004.
[9] 肖航,方成杰,张东鹏,徐文彬.三维摄影测量技术在船舶轴系对中检测中的应用研究[J].科技资讯,2018,16(29):95-99.DOI:10.16661/j.cnki.1672-3791.2018.29.095.
[10] 王凯, 陈艳平, 王成,等. 一种基于数学模型的自动测量方法[J]. 计测技术, 2018,38(6): 29-32.
[11] 刘军,崔学伟,田甜.最小二乘法在流量计算中的应用[J].电子测量技术,2018,41(21):35-41.DOI:10.19651/j.cnki.emt.1801831.
[12] 丁克良,欧吉坤,赵春梅.正交最小二乘曲线拟合法[J].测绘科学,2007,32(3):18-19.DOI:10.3771/j.issn.1009-2307.2007.03.006.
[13] BJORCK A. Numerical methods for least squares problems[M]. [S.l.] :SIAM Publications Philadelphia PA,1996.
[14] 刘辰魁, 屈宏强, 陈世砚, 等. 钟罩装置标准容积的数学模型研究与建立[J]. 计量学报, 2018, 39(6): 874-877. DOI:10.3969/j.issn.1000-1158.2018.06.23.
Options
Outlines

/

〈 〉