河北大学学报(自然科学版) ›› 2020, Vol. 40 ›› Issue (1): 12-17.DOI: 10.3969/j.issn.1000-1565.2020.01.003

• • 上一篇    下一篇

固态基质环境下DCM荧光过程分析

谢宁波,尹政政,邓儒,党伟   

  • 收稿日期:2019-05-29 出版日期:2020-01-25 发布日期:2020-01-25
  • 通讯作者: 党伟(1981—),男,河北唐山人,河北大学副教授,博士,主要从事有机、无机半导体载流子动力学的研究.E-mail:dangwei@hbu.edu.cn
  • 作者简介:谢宁波(1995—),男,陕西渭南人,河北大学在读硕士研究生,从事激光光谱方面的研究. E-mail:1623180265@qq.com
  • 基金资助:
    国家自然科学基金资助项目(21503066);高等学校科学技术研究项目(ZC2016003)

Analysis of fluorescence process of DCM in solid matrix environment

XIE Ningbo,YIN Zhengzheng, DENG Ru, DANG Wei   

  1. Hebei Key Laboratory of Optoeletronic Information Materials, College of Physics Science and Technology, Hebei University, Baoding 071002, China
  • Received:2019-05-29 Online:2020-01-25 Published:2020-01-25

摘要: DCM(4-二氰基甲基-2-甲基-6-(p-二甲基胺苯乙烯)H-吡喃)分子被广泛应用于激光器、有机发光二极管等器件,但针对于其在固体基质时的不同质量分数及温度下,对发光光谱和荧光寿命的研究相对较少.故而本文将不同质量的DCM溶解在PMMA(甲基丙烯酸甲脂)中,测量了在不同温度下,质量分数为1%和5%DCM样品的发光光谱及其动力学曲线.实验发现,质量分数为1%的DCM样品在温度35~295 K时基质极性无明显变化,而质量分数为5%的DCM样品,在195~295 K 时基质极性减小.实验还发现质量分数为1%和5%的DCM样品在温度下降过程中均表现出发光增强和荧光寿命增加的现象.

关键词: DCM, 基质极性, 发光

Abstract: Although DCM molecules are widely used in the field of lasers, organic light-emitting diodes, and etc., there are relatively few studies on its luminescence properties in solid matrices. In this paper DCM with 1% and 5%weight ratios were dissolved in poly(methyl methacrylate)(PMMA), and its emission process were analyzed at different temperatures. It was found that DCM sample(1% weight ratios)matrix polarity did not show significant change in temperature range of 295-35 K.However, DCM samples of 5%weight ratios, showed reduced matrix polarity in the temperature range of 295-195 K. Both DCM samples show fluorescence intensity and fluorescence lifetime increases with temperature decrease.

Key words: DCM, matrix polarity, luminescence

中图分类号: