Design of detection circuit system for MEMS optical fiber pressure sensor

doi:10.3969/j.issn.1000-1565.2018.06.005

Abstract

Abstract: According to the characteristics of reflective intensity modulated MEMS fiber optic pressure sensor, a detection circuit system based on STC89C52 microcontroller is designed. The system is divided into photoelectric conversion module, attenuation filter module, true RMS conversion module, A/D conversion module and liquid crystal display module. Using OPT101 as photoelectric conversion device, the light intensity signal transmitted by optical fiber is converted into voltage signal. After attenuation of voltage signal, it is output to AC/DC converter and A/D converter through filter. The results are displayed on the LCD screen and can be output to the computer through the interface. The test results show that the designed circuit has high precision and resolution.

Key words: optical fiber pressure sensor, photoelectric conversion, signal processing, AC/DC conversion

CLC Number:

TN253

DING Zhenjun,AN Jialin,JIA Kejun,WEI Zihui. Design of detection circuit system for MEMS optical fiber pressure sensor[J]. Journal of Hebei University (Natural Science Edition), 2018, 38(6): 582-587.

References

[1] 苑立波,房国义. 反射补偿式光纤位移传感器的理论分析[J]. 光通信技术, 1993, 19(1): 56-82. DOI:10.13921/j.cnki.issn1002-5561.1993.04.010. YUAN L B, FANG G Y. The theoretieal analysis of reflective compensation type fiber-optic displacement sensing probe[J]. Optical Communication Technology, 1993, 19(1): 56-82. DOI:10.13921/j.cnki.issn1002-5561. 1993.04.010.
[2] FENG J, ZHAO Y,LI S S, et al. Fiber-optic pressure sensor based on tunable liquid crystal technology[J]. IEEE Photonics Journal, 2010, 2(3):292-298.
[3] 王宏亮,宋娟,冯德全,等. 应用于特殊环境的光纤光栅温度压力传感器[J]. 光学精密工程,2011,19(8):546-551. DOI:10.3788/OPE.20111903.0545. WANG H L, SONG J, FENG D Q, et al. High temperature-pressure FBG sensor applied to special environments[J]. Optics and Precision Engineering, 2011,19(8):546-551. DOI:10.3788/OPE.20111903.0545.
[4] ZHOU X, CHEN K, MAO X, et al. A reflective fiber-optic refractive index sensor based on multimode interference in a coreless silica fiber[J].Optics Communications,2015,340:50-55.
[5] 王兰勋,彭景芹,辛儒.一种基于单片机通用口实现串行通信的方法[J].河北大学学报(自然科学版),2005,25(4):431-433. WANG L X, PENG J Q, XIN R. A method of carrying out serial communication among single chip computers using the common ports[J]. Journal of Hebei University(Natural Science Edition),2005,25(4):431-433.
[6] 朱良琴,姚平,王格林,等.基于OPT101的激光监听仪设计[J]. 电子设计工程,2015,23(19):8-10. ZHU L Q, YAO P, WANG G L, et al. Design of laser monitor based on OPT101[J]. Electronic Design Engineering, 2015,23(19):8-10.
[7] 田聪. RC有源滤波器的优化设计[D]. 杭州:浙江师范大学,2016. TIAN C. The optimal design of the RC active filter[D]. HangZhou: Zhejiang Normal University, 2016.
[8] 乐珺,姚恩涛,张明伟,等. 基于AD637的直流电源纹波真有效值测量电路设计[J]. 电源技术,2014,38(10):1926-1929. LE J, YAO E T,ZHANG M W, et al. Design of measurement circuit on true RMS for DC power ripple based on AD637[J]. Chinese Journal of Power Sources, 2014,38(10):1926-1929.
[9] 黄光辉, 董天临. 16位Σ-ΔA/D转换器AD7705与微控制器的接口设计[J]. 现代电子技术,2002(5): 33-35. HUANG G H,DONG T L. Interface design of 16 bΣ-ΔA/D converter AD7705 and microcontroller[J]. Modern Electronics Technique,2002(5): 33-35.
[10] 陈勇钢,吴伯农.16位Σ-Δ模数转换器AD7705及其校准[J].现代电子技术,2006(4):124-126. CHEN Y G, WU B N. Introduction and calibration of the 16 b sigma delta A/D converter AD7705[J]. Modern Electronics Technique, 2006(4):124-126.
[11] 王艳春,罗少轩.基于MC9S08SH4和AD7705的智能传感器系统设计[J].电子技术应用,2010,36(3):83-85. WANG Y C, LUO S X. Design of intelligent sensor system based on MC9S08SH4 and AD7705[J]. Application of Electronic Technique,2010,36(3):83-85.
[12] 隋鑫, 徐熙平, 徐海峰,等. 反射式光纤传感器光纤对强度调制特性分析[J]. 长春理工大学学报(自然科学版), 2009, 32(2):220-223. SUI X, XU X P,XU H F,et al. Analysis on intensity modulation characteristics for optic fiber pair of reflective fiber optic sensor[J]. Journal of Changchun University of Science and Technology(Natural Science Edition), 2009, 32(2):220-223.